Category - LABS

SSH Configuration

Configure SSH on R1  R1 Router>enable Router#configure terminal Router(config)#hostname R1 R1(config)#ip domain name BITXPERT.LOCAL R1(config)#ip...

Policy Based Routing

Configure the IP Address as given in the Topology. R1 R1>enable R1#configure terminal R1(config)#interface Ethernet 0/2 R1(config-if)#ip address 2...

Static Routing

Design the topology (Connectivity) Assign the IP Address according to the diagram Make sure that interfaces used should be in UP UP state TASK:...

Sagar Jadhwani