Install GNS3 VM 1.5.2 and IOU Images- Cisco Certification
Link: https://www.dropbox.com
In this video we are going to learn that How to Install and Configure GNS VM 1.5.2 on Vmware. And this GNS3 is Definitely Required for those who are Preparing for CCNA CCNP and CCIE – Cisco Certification. We can Add any Networking Images in this GNS3 VM 1.5.2.
Windows Installation
SUPPORTED OPERATING SYSTEMS
GNS3 supports the following Windows operating systems:
- Windows 7 SP1 (64 bit)
- Windows 8 (64 bit)
- Windows 10 (64 bit)
- Windows Server 2012 (64 bit)
- Windows Server 2016 (64 bit)
Note: The 32 bit version is not discussed in this guide.
MINIMUM REQUIREMENTS
The following are the minimum requirements for a Windows GNS3 environment:
| ITEM | REQUIREMENT |
| Operating System | Windows 7 (64 bit) or later |
| Processor | 2 or more Logical cores |
| Virtualization | Virtualization extensions required. You may need to enable this via your computer’s BIOS. |
| Memory | 4 GB RAM |
| Storage | 1GB available space (Windows Installation is < 200MB). |
| Additional Notes | You may need additional storage for your operating system and device images. |
IMPORTANTThe hardware requirements listed here are minimum requirements for a small GNS3 environment. If you want to create complex environments with many devices, your hardware requirements will increase.
RECOMMENDED REQUIREMENTS
The following are the recommended requirements for a Windows GNS3 environment:
| ITEM | REQUIREMENT |
| Operating System | Windows 7 (64 bit) or later |
| Processor | 4 or more Logical cores – AMD-V / RVI Series or Intel VT-X / EPT |
| Virtualization | Virtualization extensions required. You may need to enable this via your computer’s BIOS. |
| Memory | 8 GB RAM |
| Storage | Solid-state Drive (SDD)
35 GB available space |
| Additional Notes | Virtualizing devices is processor and memory intensive. More is better but properly configured device trumps RAM and Processing power. |
IMPORTANTThe hardware requirements listed here are recommended requirements for a small GNS3 environment. If you want to create complex environments with many devices, your hardware requirements will increase.
OPTIMAL REQUIREMENTS
The following are the optimal requirements for a Windows GNS3 environment:
| ITEM | REQUIREMENT |
| Operating System | Windows 7 (64 bit) or later |
| Processor | i7 CPU
4 or more Logical cores – AMD-V / RVI Series or Intel VT-X / EPT |
| Virtualization | Virtualization extensions required. You may need to enable this via your computer’s BIOS. |
| Memory | 16 GB RAM |
| Storage | Solid-state Drive (SDD)
35 GB available space |
| Additional Notes | Virtualizing devices is processor and memory intensive. More is better but properly configured device trumps RAM and Processing power. |
IMPORTANT: If you want to create complex environments with many devices, your hardware requirements will increase.
Hi Sagar,
first of all compliment for your good work!
I have a question. I am studying for the CCNA and I used your IOU images,
I found that it’s not present the ip arp inspection comand… why? How I can fix it.
Thanks for your help,
Salvatore